According to the phototaxis of mosquitoes, the electronic mosquito killer uses low-power self-ballasted fluorescent tubes to induce mosquitoes, and the high-voltage electric shock mosquitoes that are obtained by the internal circuit through voltage doubler rectification can also provide micro-light source lighting for the living room.
Typical external structure of an electronic mosquito killer. The lamp holder assembly and the base are composed of two parts. The lighthouse assembly contains fluorescent tubes, high voltage electrodes, grids, and security guardrails. The fluorescent tube is installed vertically in the middle, and a grid grid made of plexiglass with good transparency and good insulation is selected as the periphery, and the high voltage electrode is wound on the grid frame in parallel. The perimeter of the grid is made of a number of upright plexiglass rods to form safety barriers. The barriers and the grids are spaced at a certain distance to prevent users from touching the grid and getting an electric shock. The lamp frame assembly is mounted on the base, a power switch is installed above the base, the power line is connected from the back of the base, and the entire circuit and the high voltage generating element are installed inside the base, which is beautiful and safe.
More: Mosquito Killer Manufacturers www.kunzhong.cn